Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.     

A Review of the Bentong-Raub Suture vis-à-vis New Insight of the Tectonic Evolution of Malay Peninsula, South East Asia

As a milestone of the entire energy industry, unconventional resources have inevitably swept the world in the last decade, and will certainly dominate the global oil and gas industry in the near future. Eventually, the “unconventional” will become “conventional”. Along with the rapid development, however, some issues have emerged, which are closely related to the viability of unconventional resources development. Under the current circumstances of low crude oil and gas price, coupled with the prominent environmental concerns, the arguments about the development and production of unconventional resources have been recently heated up. This work introduced the full-blown aspects of unconventional resources especially shale reservoirs, by discussing their concepts and definitions, reviewing the shale gas and shale oil development history and necessity, analyzing the shale plays’ geology and petroleum systems with respects to key hydrocarbon accumulation elements and mechanisms, and summarizing the technology resolution. This study also discussed the relevant key issues, including significant estimation uncertainty of technically recoverable resources, the equivocal understanding of complex geology preventing the production and technologies implementation optimization, the difficulties of experiences and technologies global expanding, and the corresponding risks and uncertainties. In addition, based on the latest production and exploration data, the future perspective of the unconventional resources was depicted from global unconventional resources assessments, technology development, and limitations constraining the development.     

A COMPARISON OF IP TRANSIENT SHAPES OVER DISSEMINATED AND MASSIVE SULFIDE SHEETS IN THE LOWER PILLOW LAVAS OF CYPRUS*

A number of time-domain IP traverses were carried out across two parallel mineralized sheets in the Lower Pillow Lavas, near Mitsero, Cyprus with Huntec Mark III equipment using the pole-dipole array. In one sheet the mineralization was disseminated (2%S), and in the other it was massive (30%S). The transients were recorded at separation n= 2 at a number of points to give the complete shape of the curves. The normalized time integrals were anomalous over the two sheets, but were not significantly different; the highest values being observed over the disseminated sheet. Both sheets were also associated with high electromagnetic components of the decay curve. The chargeability and resistivity values obtained over the disseminated body were considerably higher. The metal factor was also of value in discriminating between massive ore, disseminated mineralization, and barren rock. The values of P₂ and P₃ for the two bodies were also compared (P₂ and P₃ are defined by where M₁ to M₄ are the amplitudes of the decay curve at 55, 130, 280 and 580 ms respectively). For the massive ore, P was inversely related to M, but for the disseminated ore P was independent of M. Four simple parameters from the decay curves show that indices of curve shape offer the best prospect of grade discrimination.     

Evolution of Miocene fluvial environments, eastern Potwar plateau, northern Pakistan

The Miocene-Pliocene Siwalik Group records changing fluvial environments in the Himalayan foreland basin. The Nagri and Dhok Pathan Formations of this Group in the eastern Potwar Plateau, northern Pakistan, comprise relatively thick (tens of metres) sandstone bodies and mudstones that contain thinner sandstone bodies (metres thick) and palaeosols. Thick sandstone bodies extend for kilometres normal to palaeoflow, and are composed of large-scale stratasets (storeys) stacked laterally and vertically adjacent to each other. Sandstone bodies represent single or superimposed braided-channel belts, and large-scale stratasets represent channel bars and fills. Channel belts had widths of km, bankfull discharges on the order of 10³ cumecs and braiding parameter up to about 3. Individual channel segments had bankfull widths, maximum depths, and slopes on the order of 10² m, 10¹ m and 10^?4 respectively, and sinuosities around 1-1. These rivers are comparable to many of those flowing over the megafans of the modern Indo-Gangetic basin, and a similar depositional setting is likely. Thin sandstone bodies within mudstone sequences extend laterally for on the order of 10² m and have lobe, wedge, sheet and channel-form geometries: they represent crevasse splays, levees and floodplain channels. Mudstones are relatively bioturbated/disrupted and represent mainly floodbasin and lacustrine deposition. Mudstones and sandstones are extremely disrupted in places, showing evidence of prolonged pedogenesis. These ‘mature’ palaeosols are m thick and extend laterally for km. Lateral and vertical variations in the nature of their horizons apparently depend mainly on deposition rate. The 500 m-thick Nagri Formation has a greater proportion and thicker sandstone bodies than the overlying 700 m-thick Dhok Pathan Formation. The thick sandstone bodies and their large-scale stratasets thicken and coarsen through the Nagri Formation, then thin and fine at the base of the Dhok Pathan Formation. Compacted deposition rates increase with sandstone proportion (0-53 mm/year for Nagri, 0-24 mm/year for Dhok Pathan), and palaeosols are not as well developed where deposition rates are high. Within both formations there are 100 m-scale variations (representing on the order of 10⁵ years) in the proportion and thickness of thick sandstone bodies, and tens-of-m-scale alternations of thick sandstone bodies and mudstone-sandstone strata that represent on the order of 10⁴ years. Formation-scale stratal variations extend across the Potwar Plateau for at least 100 km, although they may be diachronous: however, 100-m and smaller scale variations can only be traced laterally for up to tens of km. Alluvial architecture models indicate that increases in the proportion and thickness of thick sandstone bodies can be explained by increasing channel-belt sizes (mainly), average deposition rate and avulsion frequency on a megafan comparable in size to modern examples. 100-m-scale variations in thick sandstone-body proportion and thickness could result from ‘regional’ shifts in the position of major channels, possibly associated with ‘fan lobes’on a single megafan or with separate megafans. However, such variations could also be related to local changes in subsidence rate or changes in sediment supply to the megafan system. Formation-scale and 100-m-scale stratal variations are probably associated with interelated changes in tectonic uplift, sediment supply and basin subsidence. Increased rates of hinterland uplift, sediment supply and basin subsidence, recorded by the Nagri Formation, may have resulted in diversion of a relatively large river to the area. Alternatively, changing river sizes and sediment supply rates may be related to climate changes affecting the hinterland (possibly linked to tectonic uplift). Climate during deposition of the Siwalik Group was monsoonal. Although the deposits contain no direct evidence for climate change, independent evidence indicates global cooling throughout the Miocene, and the possibility of glacial periods (e.g. around 10-8 Ma, corresponding to base of Nagri Formation). If the higher Himalayas were periodically glaciated, a mechanism would exist for varying sediment supply to megafans on time scales of 10⁴-10⁵ years. Although eustatic sea-level changes are related to global climatic change, they are not directly related to Siwalik stratigraphic changes, because the shoreline was many 100 km away during the Miocene.     

Neo-deterministic seismic hazard assessment in North Africa

North Africa is one of the most earthquake-prone areas of the Mediterranean. Many devastating earthquakes, some of them tsunami-triggering, inflicted heavy loss of life and considerable economic damage to the region. In order to mitigate the destructive impact of the earthquakes, the regional seismic hazard in North Africa is assessed using the neo-deterministic, multi-scenario methodology (NDSHA) based on the computation of synthetic seismograms, using the modal summation technique, at a regular grid of 0.2?×?0.2°. This is the first study aimed at producing NDSHA maps of North Africa including five countries: Morocco, Algeria, Tunisia, Libya, and Egypt. The key input data for the NDSHA algorithm are earthquake sources, seismotectonic zonation, and structural models. In the preparation of the input data, it has been really important to go beyond the national borders and to adopt a coherent strategy all over the area. Thanks to the collaborative efforts of the teams involved, it has been possible to properly merge the earthquake catalogues available for each country to define with homogeneous criteria the seismogenic zones, the characteristic focal mechanism associated with each of them, and the structural models used to model wave propagation from the sources to the sites. As a result, reliable seismic hazard maps are produced in terms of maximum displacement (D _max), maximum velocity (V _max), and design ground acceleration.     

Potential for Southern Hemisphere climate surprises

Climate model results suggest that future climate change in Antarctica will be accompanied by continued strengthening and poleward contraction of the Southern Ocean westerly wind belt. Paleoclimate records suggest past changes in the westerly winds can be abrupt and that healing of the Antarctic ozone hole could lead to poleward contraction of the westerlies and increased meridional atmospheric transport of warm air regionally into Antarctica. An abrupt shift to more meridional circulation could lead to notable changes in moisture availability for extra‐Antarctic regions, increased Antarctic ice sheet disintegration and more rapid sea‐level rise.     

Middle Permian Mixed Siliciclastic-Carbonate System on the Northwestern Margin of the Indian Plate, Pakistan: Implications for Paleoclimate and Carbonate Platform Evolution

A mixed siliciclastic-carbonate system that responds to changes in Permian climate and subsequent carbonate platform evolution is investigated using microscopic details of the Middle Permian Amb Formation(Fm.),in Saiyiduwali section,Khisor Range,northern Pakistan.Thin sections were made from rocks throughout the stratigraphic section of the Amb Fm.and analyzed with an emphasis on carbonate and clastic microfacies,and the latter interpreted within the existing chronostratigraphic framework.Outcrop observations reveal that the units comprise coarse-grained,channelized,ripplemarked,and burrowed sandstone and sandy,fossiliferous limestone with minor marls and shale intercalations,suggesting deposition in a subaqueous tide-dominated delta to beach barrier.Based on the determined seven microfacies coupled with outcrop observation,the Amb Fm.was deposited in a tide-influenced subaqueous delta to middle shelf environment under fluctuating sea level.The deposition of compositionally mature sandstone in the lower part of the formation suggests reworking of detritus from the rift shoulders and an adjacent source area with an ambient warm and humid climate.The stratal mixing of carbonates and compositionally mature siliciclastic units in the middle part suggest deposition under tectonic and climate-induced terrigenous and carbonate fluxes to the basin.Thus the deposition shows a perfect transition from clastic-dominated deltaic to pure carbonate platform settings as a result of warm climate and tectonics.This Middle Permian warming is confirmed by sea-level rise and the presence of a temperature-sensitive fusulinid fauna in association with photozoan-based ooids.Deposition of the Amb Fm.and establishment of a carbonate platform are envisaged to be associated with major rifting of northern Gondwana,which subsequently resulted in the development of a rift basin at the passive margin of the NW Indian Plate then in northern Pakistan.